Mathematical Modelling Report

Modified: 18th May 2020
Wordcount: 7845 words

Disclaimer: This is an example of a student written essay. Click here for sample essays written by our professional writers.
Any opinions, findings, conclusions or recommendations expressed in this material are those of the authors and do not necessarily reflect the views of UKEssays.ae.

Cite This

Scientific problems are approached by building ‘models’. Not little cardboard models, but models made from mathematical tools. We can play with the symbolic models and adjust them until they start to behave in a way that resembles the way we expect them to, in order to be able to make projections. When we have done this, we get an understanding of the things we care about which is much deeper than we could ever get if we only use words and pictures. Mathematical models do not replace words and pictures, they sharpen them. So models deepen our understanding of ‘systems’, whether we are talking about a mechanism, a robot, a chemical plant, an economy, a virus, an ecology, a cancer or a brain. And it is necessary to understand something about how models are made.

In the following tasks, we are going to use such approach, in which we apply calculus to solve these tasks, and try to understand to behaviour of the functions asserted, or evolved from our analytical approach.

 

Task 1:

Given that the Rock ’n’ Roll coaster given over interval of 8 seconds, then by inspection:

h8=483+4682118×8+48=0

Also, given that the Colossos coaster is modelled by:

ft=t313t2+44t32

Which is also modelled for 8 seconds, so:

                                                     f8=831382+44×832=0

Hence, by the Factor Theorem, (t-8) must be a factor of both f(t) and h(t).

First, we divide h(t) by (t-8) as follows:

                                                              4t2+14t6

   

                                              t8

       4t3+46t2118t+48

                                                            4t3+32t2

                                                                         14t2118t+48

                                                                          14t2112t

                                                                                    6t+48

                                                                                     6t+48

                                                                                            0

Therefore:

ht=t84t2+14t6

=2(t8)(2t1)(t3)

Which shows that the Rock ‘n’ Roll coaster will reach the ground level at t=0.5s, t=3s, and t=8s.       

Similarly, dividing f(t) by (t-8) gives:        t25t+4

   

                                              t8

         t313t2+44t32

                                                                t38t2

                                                                       5t2+44t32

                                                                        5t2+40t

                                                                                       4t32

                                                                                       4t32

                                                                                            0

Which means that:

ft=(t8)(t25t+4)

ft=(t1)(t4)(t8)

Hence the Colossos reaches the ground level at t=1s, t=4s, and t=8s.

To find maximum and minimum heights we use the first and second derivatives as follows:

1)      The Rock ‘n’ Roll coaster:

ht=12t2+92t118

ht=0

12t2+92t118=0

t=92±280024=236567

So, for:

                                             t1=2365671.63s

we have ht1=39.45

And for:

                                              t2=236+5676.04s

we have ht2=132.04

To determine the nature of these stationary points we apply the second derivative test as follows:

h(t)=24t+92

so, at the point (1.63, -39.45) we have a minimum since:

h1.63=24×1.63+92=52.88>0

Similarly, at the point (6.04, 132.04) the coaster reaches a maximum point since:

h6.04=24×6.04+92=52.96<0

2)      The Colossos coaster:

ft=3t226t+44

ft=0

3t226t+44=0

t=26±1486=133±373

So, for:

                                             t1=13337/32.31s

we have ft1=12.60

And for:

                                              t2=133+37/36.04s

we have ft2=20.75

To determine the nature of these stationary points we apply the second derivative test as follows:

ft=6t26

so, at the point (2.31, 12.60) we have a maximum since:

f2.31=2.31×626=12.14<0

Similarly, at the point (6.36, -20.75) the coaster reaches a minimum point since:

f6.04=6×6.3626=12.16>0

Table of values for both graphs are as follows:

t

h(t)

0

48

0.5

-28

1

0

2

-36

3

0

4

56

5

108

6

132

6.5

126

7

104

7.5

63

8

0

t

f(t)

0

-32

1

0

2

12

3

10

4

0

5

-12

6

-20

7

-18

8

0

And the graphs of both h(t) and f(t) are shown below:

h(t)

f(t)

The above graphs clearly show that the Rock ‘n’ Roll coaster is bigger than the Colossos coaster.

Finally, to determine which coaster has the larger underground area, we calculate the areas underneath the x-axis for both functions as follows:

  • The Rock ‘n’ Roll coaster:

1234t3+46t2118t+48dt=t4+463t359t2+48t(12 ,3)65.1 

  • The Colossos coaster:

01t313t2+44t32dt+48t313t2+44t32dt=t44133t3+22t232t0,1+t44133t3+22t232t4,867.42

Therefore, we can deduce that the Colossos coaster has larger underground area than the Rock ‘n’ Roll coaster.

Task 2

To find the maximum speed we use the first derivative in order to find the local points, as follows:

vt=30.4t

And setting the first derivative equal to zero gives:

30.4t=0

Or                                                                   t=30.4=7.5s

Which gives:

v7.5=37.50.27.52=11.25ms1

And to prove that this speed is a maximum speed we apply the second derivative test as follows:

vt=0.4<0 

So, the stationary point found is a maximum.

And a graph of the given velocity model is shown below:

 

 

 

 

 

 

 

 

 

 

 

 

Task 3

r

h

Let the proposed can be as shown in the figure above, where r is the radius of the base, and h is the height, then we deduce that the volume of the can V is given by:

V=πr2h

Or

                                                                  πr2h=330

                (1)

Also, the total surface area of this can A is given by:

                                                            A=2πr2+2πrh

             (2)

From relation (1) we have h=330πr2

which when substituted in relation (2) we obtain:

A=2πr2+2πr×330πr2

Or

                                                               A=2πr2+660r

                  (3)

Hence to find the minimum area of material needed, we should check whether A given by equation (3), attains a minimum value for some value of r.

Taking the first derivative of this function gives:

A=4πr660r2

Then setting A’ equal to zero gives:

 4πr660r2=0

So                                                                r=165π33.745cm

To determine the nature of this local point we apply the second derivative test:

A=4π+1320r3

Which takes positive values for r=165π3

since:

A=4π+1320165π=12π>0

Therefore, the minimum area of material needed can be achieved by setting the radius of the can to 3.745cm, and the height h=7.49cm, which gives the minimum surface area of

                                                          A264.357cm2

Task 4

To find the minimum and maximum values of p, we use the first derivative as follows:

p=3x236x+105

Then p=0

gives:

3x236x+105=0

3x212x+35=0

(x5)(x7)=0

Hence:

             Either                                      x=5 p=112p

             Or                                         x=7 p=108p

To determine the nature of these two points, we apply the second derivative text:

p=6x36

So, at the point (5,112) we have:

p=6×536=6<0

Which implies that the function has a maximum at this point.

Similarly, at the point (7,108) the function has a minimum since:

p=6×736=6>0

A graph of the function is as follows:

Task 5

Since the horizontal distance AB is the sum of the two segments AD and DB, we can find these two distances by applying Pythagoras Theorem to the triangles ACD and CDB respectively, thus:

From triangle ACD we have:

AC2=AD2+CD2

So                                                             AD2=552202=2625

Which gives                                            AD51.24m

Similarly, applying Pythagoras Theorem on triangle CBD gives:

CB2=CD2+BD2

Hence                                                      BD2=302202=500

Which gives                                            BD22.36m

Therefore,

AB=AD+BD51.24+22.36=73.60m

Conclusion:

The above tasks, and our techniques in approaching them, have shown how powerful a technique calculus can be, by enabling us to understand the behaviour of the functions obtained in these models we applied to solve these tasks.

References:

  1. An Introduction To Mathematical Modelling by Michele D Alder 2001.
  2. Mathematical Techniques: An Introduction for the Engineering, Physical, and Mathematical Sciences, D W Jordan and P Smith.
  3. Desmos.com for graph sketching.

 

Cite This Work

To export a reference to this article please select a referencing style below:

Give Yourself The Academic Edge Today

  • On-time delivery or your money back
  • A fully qualified writer in your subject
  • In-depth proofreading by our Quality Control Team
  • 100% confidentiality, the work is never re-sold or published
  • Standard 7-day amendment period
  • A paper written to the standard ordered
  • A detailed plagiarism report
  • A comprehensive quality report
Discover more about our
Essay Writing Service

Essay Writing
Service

AED558.00

Approximate costs for Undergraduate 2:2

1000 words

7 day delivery

Order An Essay Today

Delivered on-time or your money back

Reviews.io logo

1837 reviews

Get Academic Help Today!

Encrypted with a 256-bit secure payment provider