Direct Compression to Create Paracetamol Tablets

Modified: 24th May 2018
Wordcount: 1572 words

Disclaimer: This is an example of a student written essay. Click here for sample essays written by our professional writers.
Any scientific information contained within this essay should not be treated as fact, this content is to be used for educational purposes only and may contain factual inaccuracies or be out of date.

Cite This

Objective:

To formulate Paracetamol Tablets using Direct Compression (DC) method.

Introduction:

Direct compression is the most simple and economical method used in tableting. Excipients are added to the active pharmaceutical ingredient which is then thoroughly mixed before compression to form tablets.1 In wet and dry and dry granulation, there is no pre-treatment of the powder required. 2 In this method, it is easier to process due to less unit operations, less machinery, fewer numbers of personnel and time efficient.3 Powders with poor flowing properties and bad compressible characteristics are not suitable for this method. In this experiment, the paracetamol powder is used which possess suitable characteristics for this method to be used due to its large particle size, spherical in shape and good flowing properties.

Procedure:

Please refer to PP 353/4 Dosage Form Design 2 lab manual page 2.

Discussion:

Direct compression method is the most common method used for tableting. Others include wet and dry granulation method which involves more complicated process. Direct compression provides much simpler, efficient and economical process in manufacturing tablets since only two vital steps are involved which are blending and compaction. However, excipients are required to ensure proper compression of the powders to form quality tablets.3 In this experiment, paracetamol and excipients are mixed or blended together which then compressed directly using rotary press machine fitted with 12mm circular flat punches.4 Basically, this machine operates in 3 stages which are filing of the die with powders, compression of powders and tablet ejection.

Get Help With Your Essay

If you need assistance with writing your essay, our professional essay writing service is here to help!

Essay Writing Service

Tableting of paracetamol using direct compression method requires the use of excipients to produce good tablets of high quality. In order to obtain tablets with optimum hardness, two excipients are used, Explotab and Magnesium Stearate. Explotab otherwise known as Sodium Starch Glycolate acts as disintegrant which break the tablet into smaller fragments to spread the drug ingredients in the aqueous medium. The rationale behind is to change the dissolution rate of the tablet in the gastrointestinal tract and to increase the bioavailability of the drugs. Explotab acts rapidly and causes extensive swelling with minimal gelling. It absorbs water to make tablets swells overcoming the cohesive forces between particles of the tablet.5

The other excipient is Magnesium Stearate which is used as a lubricant to decrease the interfacial friction between the surface of tablets and the surface of the die wall during the last stage of ejection. Magnesium stearate exists as “plate-like” crystals stacked together like a deck of cards which is responsible in coating adjacent drug particles or other excipients during the blending process. This will reduce the adhesion forces and improve the flowability of the powders. In addition, the friction between the dies and the punches can also be reduced and thus prevent wear of the machine.6

Find Out How UKEssays.com Can Help You!

Our academic experts are ready and waiting to assist with any writing project you may have. From simple essay plans, through to full dissertations, you can guarantee we have a service perfectly matched to your needs.

View our academic writing services

Direct compression method provides various advantages. Its use in the pharmaceutical industries is cost effective, high stability, improved dissolution, less wear and tear of punches and simplified validation.2 Moreover, this methods requires fewer processing steps and less requirements on equipment, time, space and labor input leading to lowered cost production.7 Besides, this method is also suitable for the production of thermo labile and moisture sensitive active ingredients. This is because dry blending eliminates heat and moisture, increasing the stability by preventing any hydrolysis to happen.

However, there is some limitations in this direct compression method. Distribution uniformity of low dose drugs may be a problem and on the other hand, for high dose drugs such as Aluminium hydroxide has high bulk volume, poor flowability and poor compressibility. Moreover, both good compressibility and flowability are among the characteristics to be considered when selecting excipients. Besides, unblending may be a problem arose when the particles size or densities between active pharmaceutical ingredients and excipients varies. Lastly, the absence of moisture will result in formation of static charges, again lead to unblending.7

During the experiment, various defects were found in the tablets produced. In a few tablets, cracking and chipping were found. The tablets tend to disintegrate easily with light force exerted on it. Cracking can be defined as small, fine cracks observed on the upper and lower central surface of the tablets. On the other hand, chipping is the breaking of tablet edges, while the tablets leave the press or during subsequent handling operations. These defects may be due to the large size granules, too dry granules or granulation too cold. In order to prevent this, reduce the size of the granules, moisten the granules properly and add proper amount of dry binders and compress the powders at room temperature.8 The other defect is that some black spots are present on the tablets. This may be due to impurities present in the tableting machine due to improper maintenance.

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn2/v/t34.0-12/1947995_10202483086811293_1417253003_n.jpg?oh=015c0504dd4c32cbfebf85bd44668669&oe=5325D23F&__gda__=1395010128_8d4ee04debba4d112b944066c1eefd52https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn2/v/t34.0-12/1961600_10202483086851294_1315434514_n.jpg?oh=323db1ba5339ece86b394de17983e508&oe=53261E6E&__gda__=1394972673_c696e8cfaddd002fc954d175e9f221f2

Conclusion

As a conclusion, direct compression method is an economical and most common method used in the pharmaceutical industries for the manufacturing of tablets due to its cost effectiveness and fewer steps of operations. Excipients like Explotab and Magnesium Stearate are responsible to facilitate the tablet formulation by acting as disintegrant and act as lubricant, respectively, to improve the dissolution and flowability of powder.

References:

  1. Kerry: Direct Compression [Online]. 2013 [cited 2013 Jan 19]; Available from: URL: http://www.sheffieldbioscience.com/direct-compression-tablets/
  2. Mitul S. Direct Compression Tablet [Online]. 2010 Jun 29 [cited 2013 Jan 19]; Available from: URL: http://www.doyouknow.in/Articles/Pharmaceutical/Direct-Compression-Tablet.aspx
  3. Imran A. Tablet: Manufacturing methods/ Direct compression [Online]. 2010 Dec 22 [cited 2013 Jan 19]; Available from: http://pharmaceuticalguidebook.blogspot.com/2010/12/tabletmanufacturing-methodsdirect.html
  4. Continuous Pharmaceutical Dry Granulation and Direct Compression Tableting Process [Online]. 2008 [cited 2013 Jan 19]. Available from: URL: http://www.ktron.com/industries_served/Pharmaceutical/Granulation_and_Direct_Compression_Tableting_Processes.cfm
  5. Carter JC. The Role of Disintegrants in Solid Oral Dosage Manufacturing [Online]. 2009 [cited 2013 Jan 19]; Available from: URL: http://www.carterpharmaceuticalconsulting.com/articles/The-role-of-disintergrants.html
  6. Carter JC. The Role of Lubricants in Solid Oral Dosage Manufacturing [Online]. 2009 [cited 2013 Jan 19]; Available from: URL: http://www.carterpharmaceuticalconsulting.com/articles/role-of-lubricants-in-solid-oral-dosage-manufacturing.html
  7. Mukeshgohel. Manufacturing methods of tablets [Online]. 2009 Jun 12 [cited 2013 Jan 19]; Available from: URL: http://www.pharmainfo.net/tablet-ruling-dosage-form-years/manufacturing-methods-tablets
  8. Rana AS, Kumar SLH. Manufacturing defects of tablets:a review. Journal of Drug Delivery & Therapeutics. 201; 3(6):200-6.

 

Cite This Work

To export a reference to this article please select a referencing style below:

Give Yourself The Academic Edge Today

  • On-time delivery or your money back
  • A fully qualified writer in your subject
  • In-depth proofreading by our Quality Control Team
  • 100% confidentiality, the work is never re-sold or published
  • Standard 7-day amendment period
  • A paper written to the standard ordered
  • A detailed plagiarism report
  • A comprehensive quality report
Discover more about our
Essay Writing Service

Essay Writing
Service

AED558.00

Approximate costs for Undergraduate 2:2

1000 words

7 day delivery

Order An Essay Today

Delivered on-time or your money back

Reviews.io logo

1837 reviews

Get Academic Help Today!

Encrypted with a 256-bit secure payment provider